summation filter

summation filter

Postby edymurph » Sun May 26, 2019 3:26 am

Hi stan
This is my first post here in the forum and since I am using the program a week ago, I have not yet found this filter.
if you have, I would like you to inform me which.
I'm talking about the lottery in particular
lottofacil here from my country, but this is for any other. 25 numbers are bet on which 15 received awards and hitting 11,12,13,14 and 15 points.

Following.
This filter shows the sum of a certain number that happened compared to the current draw.
ex: 1818 contest
These are occurrences of the numbers 5,6,7,8,9,10,11,12,13,14,15.
05 = 4
06 = 27
07 = 171
08 = 454
09 = 571
10 = 394
11 = 159
12 = 34
13 = 2
14 = 1
15 = 1

This is the sum of the numbers.
15 =1818
14 =172
13 =4952
12 =55384
11 =289762
10 =763168
9 =1064412
8 =780348
7 =291778
6 =50246
5 =3084

The filter would work like this.
I take the current draw (1818) and compare it with draws 1 to 1817 and see the sums of each number.
The filter has to have minimum and maximum for each number going to the current draw.
(5,6,7,8,9,10,11,12,13,14,15)
You do not have the required permissions to view the files attached to this post.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby edymurph » Mon May 27, 2019 2:51 pm

So ... I do not know if I express myself right, but I have a little software that shows me the statistics of each draw, but I do not have the filter to apply.

Example of draw 1818.
The statistics show the number of times a number has been repeated in relation to the previous draws.
Example of contest 01 to 1817, these are the total sums of repetition of each number.
15 = 1818
14 = 172
13 = 4952
12 = 55384
11 = 289762
10 = 763168
9 = 1064412
8 = 780348
7 = 291778
6 = 50246
5 = 3084

and these are the values ​​that were repeated in the contest 1818.
05 = 4
06 = 27
07 = 171
08 = 454
09 = 571
10 = 394
11 = 159
12 = 34
13 = 2
14 = 1
15 = 1
So...
If I were to bet on the contest
1818, I would have to have a filter with the numbers (5,6,7,8,9,10,11,12,13,14)
with minimum and maximum.
So I would put whatever values ​​I wanted, do you understand me?
Waiting for answers
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby tdnl46w » Thu May 30, 2019 7:16 am

Expert Lotto has a Positional->Sum Range filter. Is this similar to what you need?
tdnl46w
 
Posts: 362
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: summation filter

Postby edymurph » Thu May 30, 2019 1:59 pm

Hello.
This sum filter is not the filter I'm looking for since it's limited to 270.
From what I observed, the Expert Lotto does not have this filter, I think.
This filter with only 3 certain numbers reduces it 98% of any lottery.
If you look at my post, you will see that the filter must have the numbers (5,6,7,8,9,10,11,12,13,14)
with minimum and maximum range where I can change the value I need.
example:
If I use the draw from 1 to 1817
and set the minimum and maximum range to 8,9,10.

08 = min and max 454
09 = mini and max 571
10 = mine and max 394

I would hit the jackpot at 100% with few tickets.

also...
Someone could answer me if I can install these filters.
You do not have the required permissions to view the files attached to this post.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby edymurph » Sun Jun 02, 2019 11:38 pm

Hi...
I would like to register the program, but I was reading the FAQ and I realized that they only accept suggestions and requests from those who are registered.
So ... to be answered or accept my request for filters, only if I am registered?
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby tdnl46w » Wed Jun 05, 2019 6:15 am

edymurph wrote:... This filter with only 3 certain numbers reduces it 98% of any lottery. ...

If I read correctly, you want to filter only tickets that have 8,9, and 10 in them? Match Numbers or Number Groups will work.

edymurph wrote:... Someone could answer me if I can install these filters.

I'm not sure if the version you are using can install those plug-ins(TimMac Filters, MS Excel 2007, Automation etc.), if not then you may need a registered version.

edymurph wrote:Hi...
I would like to register the program, but I was reading the FAQ and I realized that they only accept suggestions and requests from those who are registered.
So ... to be answered or accept my request for filters, only if I am registered?

Feature requests are only open to registered users, but general questions about the program can be answered by anyone on the forum.
tdnl46w
 
Posts: 362
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: summation filter

Postby edymurph » Wed Jun 05, 2019 8:31 pm

Thanks for the response, but these are not any of those filters either.
Expert Lotto 5.10 does not have these filters, which I've already seen.
I think you got mixed up with the photo I posted here.
This was just to show in the picture that the 8.9 e10 corresponds to the largest part within the universe of this lottery.

I'll post here a file with the 1821 LottoFacil lottery draws from my country.

Here you will see the Somatorio of contest 1 to 1821, and the occurrences of each one.
see ... if I were to bet on 1821 and choose the ranges of numbers 8,9,10.

8 = min and max 443
9 = min and max 576
10 = min and max 425

I would hit the jackpot of this lottery in just 55 tickets within the universe of 3,268,760 combinations.
If this filter interests somebody here in the forum, I can go into details of how to operate it.
You do not have the required permissions to view the files attached to this post.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby tdnl46w » Thu Jun 06, 2019 6:47 am

To clarify. Do these numbers [5,6,7,8,9,10,11,12,13,14] represent the count of repeated numbers from draw to draw, and do the values after them(e.g. 8 = min and max 443) represent the total counts of these numbers from all past draws?
tdnl46w
 
Posts: 362
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: summation filter

Postby edymurph » Thu Jun 06, 2019 3:21 pm

tdnl46w wrote:To clarify. Do these numbers [5,6,7,8,9,10,11,12,13,14] represent the count of repeated numbers from draw to draw, and do the values after them(e.g. 8 = min and max 443) represent the total counts of these numbers from all past draws?


exactly, but as you said, represent the count of repeated numbers from draw to draw.
If you sum the numbers that came, 1,0,4,34,158,425,576,443,159,20,1.
will see that gave the value of 1821.
This represents only the values ​​for that draw.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby tdnl46w » Thu Jun 06, 2019 10:26 pm

I filtered two statistics in Expert Lotto. The repeating number counts per ticket compared to the whole winning number database(this matched the number counts in the .txt file), and from draw to draw. Both of the statistics confirm that 8,9,and 10 counts are the highest three. If these type of counts are what you need to filter, then Repeating Numbers would be the primary filter to use. Example;

Repeating Numbers
- Winning Numbers: [1 latest draws - Mon, Wed, Thu, Fri]...(this can be any latest draws you need)
- Min: [8] Max: [10]
- Matching Tickets: [Accept]

When you click OK, it will accept any tickets from a package that have at least 8 to 10 repeating numbers from the latest draw. However, this still leaves 688k tickets. I'm guessing(and if anyone else wants to confirm), if EL did have a feature to use the sum of these counts per draw(e.g. 1,0,4,34,158,425,576,443,159,20,1 = 1821), it would have similar resulting tickets.
tdnl46w
 
Posts: 362
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: summation filter

Postby edymurph » Fri Jun 07, 2019 2:11 pm

tdnl46w wrote:I filtered two statistics in Expert Lotto. The repeating number counts per ticket compared to the whole winning number database(this matched the number counts in the .txt file), and from draw to draw. Both of the statistics confirm that 8,9,and 10 counts are the highest three. If these type of counts are what you need to filter, then Repeating Numbers would be the primary filter to use. Example;

Repeating Numbers
- Winning Numbers: [1 latest draws - Mon, Wed, Thu, Fri]...(this can be any latest draws you need)
- Min: [8] Max: [10]
- Matching Tickets: [Accept]

When you click OK, it will accept any tickets from a package that have at least 8 to 10 repeating numbers from the latest draw. However, this still leaves 688k tickets. I'm guessing(and if anyone else wants to confirm), if EL did have a feature to use the sum of these counts per draw(e.g. 1,0,4,34,158,425,576,443,159,20,1 = 1821), it would have similar resulting tickets.

Did you set up this lottery here from my country just to find out?
Total combinations. 3,268,760, choosing 15 within 25, with awards of 11.12, 13.14 and 15 points.
Then confirm for me by looking at the txt file if these values ​​are what you found for the 1821 draw.
As I do not have the version registered, I do not know if it is correct, but if it is, where is the filter that I can select min and max for these numbers?

8 = min and max 459
9 = min and max 609
10 = min and max 384

The sum of this txt file here, beats with the sum 1821, but the numbers are different, why?

If you can, I'd like you to make a video showing this step by step use of this filter.


Analyzing this filter of repeated numbers more deeply, I could see that it is not the filter I am looking for, although the values ​​are very similar.
If repaired, the filter shows the highest concentration also between 8,9,10.
But I noticed that it is the largest occurrence of repetitions in relation to the previous draw, because in this lottery the highest concentration of repetitions is in 9 numbers of the previous contest.
For there are 1,051,050 combinations of 9 numbers within your universe.
Tapping with the image I posted above.

Then I'll try once again to explain exactly how this filter works, because I think it's not easy to understand it.
You do not have the required permissions to view the files attached to this post.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby tdnl46w » Sat Jun 08, 2019 4:37 am

Yes, I setup the same lottery in EL. In order to find the statistics values from the [.txt] file, I had to Export/Import all the winning tickets/combinations to a separate EL package. Then use the 'Repeating Numbers' filter on that package.

Example, using draw #1818;

Repeating Numbers
- Winning Numbers:[1 latest draws- Mon, Wed, Thu, Fri]
- Min: [9] Max: [9]
- Matching Tickets: Accept

Click on 'Preview' and the number of tickets that are accepted value = 571. The same value as found in the [.txt] file under 9 for draw #1818. I also use multiple separate filters in a Complex Filter to display some of these statistics.

In my previous reply I used a full wheel package. Also, if you use different Min/Max values, then the number of accepted tickets value will be a combined sum. For example. Using Min:[8] Max:[10] for draw #1818, then the accepted tickets value is 1,422(456+571+395 from the 8,9, and 10 statistics). And using Min:[5] Max:[15] or any full range of the repeating tickets statistics, then the accepted tickets value is the total sum for that draw. Let me know if you need more information.
tdnl46w
 
Posts: 362
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: summation filter

Postby edymurph » Sat Jun 08, 2019 4:19 pm

tdnl46w wrote:Yes, I setup the same lottery in EL. In order to find the statistics values from the [.txt] file, I had to Export/Import all the winning tickets/combinations to a separate EL package. Then use the 'Repeating Numbers' filter on that package.

Example, using draw #1818;

Repeating Numbers
- Winning Numbers:[1 latest draws- Mon, Wed, Thu, Fri]
- Min: [9] Max: [9]
- Matching Tickets: Accept

Click on 'Preview' and the number of tickets that are accepted value = 571. The same value as found in the [.txt] file under 9 for draw #1818. I also use multiple separate filters in a Complex Filter to display some of these statistics.

In my previous reply I used a full wheel package. Also, if you use different Min/Max values, then the number of accepted tickets value will be a combined sum. For example. Using Min:[8] Max:[10] for draw #1818, then the accepted tickets value is 1,422(456+571+395 from the 8,9, and 10 statistics). And using Min:[5] Max:[15] or any full range of the repeating tickets statistics, then the accepted tickets value is the total sum for that draw. Let me know if you need more information.


Could you make an explanatory video about what you said?
For having the free version of the program, I think I have limitations in this filter, because it does not present what you say.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Re: summation filter

Postby tdnl46w » Sun Jun 09, 2019 1:03 am

The statistics numbers from your original posts are from a another program source, and it took me a few replies to understand them. No need for a tutorial. All you have to do, is take the winning tickets list from your lotto and insert(import .csv, .xls etc.) into the package in EL.

The 'Package' in EL is just a basic ticket list within the program that you can customize to filter, compare, or check winnings from. I'm not sure if the trial versions of EL have all the package features fully enabled though. Once you have that winning numbers list inserted into the package, then the statistics relating to repeating numbers will match. So this means EL can filter those type of statistics.
tdnl46w
 
Posts: 362
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: summation filter

Postby edymurph » Sun Jun 09, 2019 1:53 am

tdnl46w wrote:The statistics numbers from your original posts are from a another program source, and it took me a few replies to understand them. No need for a tutorial. All you have to do, is take the winning tickets list from your lotto and insert(import .csv, .xls etc.) into the package in EL.

The 'Package' in EL is just a basic ticket list within the program that you can customize to filter, compare, or check winnings from. I'm not sure if the trial versions of EL have all the package features fully enabled though. Once you have that winning numbers list inserted into the package, then the statistics relating to repeating numbers will match. So this means EL can filter those type of statistics.

Sorry for the inconvenience, but I have all the winning contests imported into the EL. (1821) But when I use the repeated numbers filter set in min and max 9 it returns to zero.
I still do not understand what I'm doing wrong.
edymurph
 
Posts: 101
Joined: Tue May 21, 2019 11:05 pm

Next

Return to Comments, suggestions, feature requests

Who is online

Users browsing this forum: No registered users and 6 guests

cron