Statistical Filter: Num Diff Sum Range Repeats [10/2]

Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby Meisterkeks » Fri Jun 14, 2019 8:28 am

Hello,

I use the statistical filter. However, there are some filters where the filter results do not match the filter's analysis. An example:

Statistical Filter: Num Diff Sum Range Repeats [10/2]

The selection of 10 draws shows a few repetitions: e.g. 20.04., 24.04., And 11.05.

Image

However, when I apply the filter, these repetitions are not recognized in both the backtest and the computation:

Image

Image

Image

Does anyone have experience how to apply this filter or whether additional settings must be made here? For many other statistical filters, the analysis is consistent with the results.
Thank you

Best Regards!

Meisterkeks
Meisterkeks
 
Posts: 221
Joined: Fri Aug 19, 2016 7:42 am
Location: Germany

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby tdnl46w » Wed Jun 26, 2019 2:39 am

Is this a plug-in? In the image's, I don't see the repetitions you are referring to.
tdnl46w
 
Posts: 357
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby Meisterkeks » Thu Jun 27, 2019 6:30 am

Hello tdnl46w,

I do not know, but here is my overview of the plugins I have installed:

Image
Thank you

Best Regards!

Meisterkeks
Meisterkeks
 
Posts: 221
Joined: Fri Aug 19, 2016 7:42 am
Location: Germany

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby tdnl46w » Sat Jun 29, 2019 6:49 am

Hi Meisterkeks.

I can't find that filter to test. I also don't have as many plug-ins available as shown in your image. Is your EL a development version?
tdnl46w
 
Posts: 357
Joined: Thu Jan 29, 2015 10:56 am
Location: USA

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby Falcon » Sat Jun 29, 2019 7:11 am

Hi Meisterkeks

I notice in your Statistical Filter settings you are Using a control parameter of Occurrence. Can I suggest you use Latest instead of Occurrence.

Latest forces the computation to be done in respect of the latest draw within your previous draw selections whereas an Occurrence value of 1 may not necessarily be occurring at the latest draw which is where I believe your observations are focused.

falcon
Falcon
 
Posts: 442
Joined: Fri Feb 23, 2007 3:13 am

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby GzWnr » Sun Jun 30, 2019 10:09 am

The problem is the Selected 1 latest draw. If you Select 1 latest draw in the properties table for example, you will see that it appear as "n/a". That's because the latest draw doesn't have the previous draw/s to compare. The Select needs to be at least 2 for X/2 as the last two draws are compared and at least 3 for X/3 where the last three draws are compared.

ie the sum history diffs levels are compared to see if the last 2 draws both fall in the 1-10, 11-20, 10 ranges (not 10 draws), hence 10/2 - 10 sum diff range / 2 draws and 30/3 is 1-30,31-60 sum diff range / latest 3 draws.
GzWnr
 
Posts: 33
Joined: Mon Sep 05, 2016 3:22 pm

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby Meisterkeks » Tue Jul 02, 2019 10:02 am

Hello everybody,

could not solve the problem yet.

@ tdnl46w
my current EL version:
Image

@ Falcon
I have tested everything, but unfortunately always without success.

@ GzWnr
The hints were interesting. When switching to "2 latest draws", and Occurrence or Latest = 1, back-test results in:

Image

BUT:
I still find no relation between the input at Statistical Filter Num Diff Sum Range Repeats [10/2] and the results.

Example: The result on 04.05.2019 is a 2.

Image

I can not find a solution for a correct input, so I backtest for the 04.05. get a correct result or with running with cut-off by 01.05. the correct tip row is selected.
Where do I still have the thought or registration error.

Thank you again.
Thank you

Best Regards!

Meisterkeks
Meisterkeks
 
Posts: 221
Joined: Fri Aug 19, 2016 7:42 am
Location: Germany

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby GzWnr » Thu Jul 04, 2019 1:58 pm

Hi Meisterkeks,

The only draws that repeated for this stat were the "0"s.ie 10/4, 20/4, 24/4, and 11/5. The previous draw for the 4/5 was a "0" hit not a "2", so it failed. If the 1/5 was a 2, then it would of passed. If 4/5 was a "0", it would of passed.

Note that by using the Latest=1, you are filtering that the actual stat shown in the properties table will repeat.

Kind regards
GzWnr
 
Posts: 33
Joined: Mon Sep 05, 2016 3:22 pm

Re: Statistical Filter: Num Diff Sum Range Repeats [10/2]

Postby Meisterkeks » Fri Jul 12, 2019 6:41 am

Hallo GzWnr,

Thank you for the repeated explanation - now I understood the filter. :D
Thank you

Best Regards!

Meisterkeks
Meisterkeks
 
Posts: 221
Joined: Fri Aug 19, 2016 7:42 am
Location: Germany


Return to Comments, suggestions, feature requests

Who is online

Users browsing this forum: No registered users and 5 guests

cron