stan wrote:teoman wrote:stan wrote:i don't think you do:)
if you look at your screen shot the most common difference in simulation results has occurrence of approximately 24000 (in level 2). so 1% is 240 so the minimum value transfered to estimates hints are simulated differences with occurrence of 240 or higher - so the result -28.
I need a more small reduction from 24 to 24,000 (1% to 1.000% or 0.1% to 100%) so (-48) - (-28) = 20 => 41.66% to become (-48) - (-46) = 2 => 4,166% if they choose 0.1% but I choose 0.4% and then I will be (-48) - (-40) = 8 => 16.66%.
the same applies to the maximum range transfered to estimates hints.
well, i can add decimal points to threshold fields if you insist. but i don't think it's wise to include differences with very low occurrences in your estimates
Stan is a error of operation? Why are not shown all decimals (0.10%, 0.20%, 0.30%, 0.40%, 0.60%, 0.70%, 0.80%, 0.90%)? Only 0.50% received permission to use? For values with "+" 0.50% in the current build (110513) is greater than 1% of the build 110506, some values is in decrease instead of increase. For values with "-" 0,50% reduced differences with very least in compared with 1% like as when 0.50% would be by to 0.80% to 0.93% for build 110506.
Here is 1% for build 110506:
(-58) - (-43) = 15 => 25,86%
(-63) - (-43) = 20 => 31,75%
(-48) - (-28) = 20 => 41,66%
(-59) - (-44) = 15 => 25,42%
(-81) - (-56) = 25 => 30,86%
(-70) - (-48) = 22 => 31,43%
(-116)-(-80) = 36 => 31,03%
(-85) - (-57) = 28 => 32,94%
(-82) - (-53) = 29 => 35,37%
(-92) - (-70) = 22 => 23,91%
(-50) - (-34) = 16 => 32,00%
(-62) - (-41) = 21 => 33,87%
(-105)-(-75) = 30 => 28,57%
And here is 0,50% for build 110513
(-58) - (-46) = 12 => 20,69% => (0,80% build 110506)
(-63) - (-46) = 17 => 26,98% => (0,85% build 110506)
(-48) - (-31) = 17 => 35,42% => (0,83% build 110506)
(-59) - (-47) = 12 => 20,34% => (0,80% build 110506)
(-81) - (-58) = 23 => 28,39% => (0,92% build 110506)
(-70) - (-51) = 19 => 27,14% => (0,86% build 110506)
(-116)-(-85) = 31 => 26,72% => (0,86% build 110506)
(-85) - (-62) = 23 => 27,06% => (0,82% build 110506)
(-82) - (-55) = 27 => 32.93% => (0,93% build 110506)
(-92) - (-73) = 19 => 20,65% => (0,86% build 110506)
(-50) - (-36) = 14 => 28,00% => (0,87% build 110506)
(-62) - (-43) = 19 => 30,65% => (0,90% build 110506)
(-105)-(-81) = 24 => 22,86% => (0,80% build 110506)
It would be better to put all the decimals to be able to choose each user according to preferences.
You do not have the required permissions to view the files attached to this post.