Combinations Filter

Combinations Filter

Postby dreamweaver » Sat Jun 03, 2017 4:00 pm

Hi Stan,

I have created a combination statistic filter as follows:

Combine : ODD/EVEN
+
History Sum Root 0
+
History Sum Root 1

In total (3) combinations

- I am testing this filter for the Draw date 25/5/2017 for the Australian Powerball lotto draw:

- The actual values for the combination filter for that draw was as follows:

ODD/EVEN: 3:3 RATIO
History Sum Root value for Level 0 = 9
History Sum Root value for Level 1 = 3

As per the properties table below

Properties.JPG


I then ran a Winning Number Analysis over the interval of 25 draws
and selected the COMBINED STATISTICS filter for this analysis
with the results as below:

Winning Numbers Analysis_25.JPG


As you can see from this analysis the combination in this filter below
is not present:

ODD/EVEN: 3:3 RATIO
History Sum Root value for Level 0 = 9
History Sum Root value for Level 1 = 3

The problem I have is when I REJECT those combinations from the analysis above in applying this Combinations Filter
I do not have the winning ticket as below:

result.JPG



If you could explain why this is happening that would be appreciated.


Thanks Stan.
You do not have the required permissions to view the files attached to this post.
dreamweaver
 
Posts: 113
Joined: Sat Apr 06, 2013 5:33 am

Return to Anything Else

Who is online

Users browsing this forum: No registered users and 1 guest