ExpertLotto.com

Hi Stan,

I have created a combination statistic filter as follows:

Combine : ODD/EVEN
+
History Sum Root 0
+
History Sum Root 1

In total (3) combinations

- I am testing this filter for the Draw date 25/5/2017 for the Australian Powerball lotto draw:

- The actual values for the combination filter for that draw was as follows:

ODD/EVEN: 3:3 RATIO
History Sum Root value for Level 0 = 9
History Sum Root value for Level 1 = 3

As per the properties table below



I then ran a Winning Number Analysis over the interval of 25 draws
and selected the COMBINED STATISTICS filter for this analysis
with the results as below:



As you can see from this analysis the combination in this filter below
is not present:

ODD/EVEN: 3:3 RATIO
History Sum Root value for Level 0 = 9
History Sum Root value for Level 1 = 3

The problem I have is when I REJECT those combinations from the analysis above in applying this Combinations Filter
I do not have the winning ticket as below:




If you could explain why this is happening that would be appreciated.


Thanks Stan.