auto sequence for each wnh segment

[PadawanLotto]

[quote=CARBOB]
[quote=PadawanLotto]
Hi sysp34, I see that you set your segment defaults so that the second segment is 0. I have a suggestion, set the segment default setting so that segments 2-0-3 and 3-0-2 are the highest occurring segments in the past drawing history. This should give you a better balance and when working the strategy these two segments should produce your better results.
[/quote]

Ragwi, for Fla, that setting will be 5/5, for 3-0-2/2-0-3. For 2-0-3/3-0-2, like Padawan recommends, the setting will be 4/4.
[/quote]Check both settings and choose the one where the two segments have the closest occurrences in the past drawings. Say 4/4 setting leaves segment 2-0-3 with 3000 occurrences and segment 3-0-2 with 2800 occurrences but, setting 5/5 leaves segment 2-0-3 with 2900 occurrences and segment 3-0-2 with 2850 occurrences, choose the 5/5 setting.

[Da80th]

[quote=PadawanLotto]


Check both settings and choose the one where the two segments have the closest occurrences in the past drawings. Say 4/4 setting leaves segment 2-0-3 with 3000 occurrences and segment 3-0-2 with 2800 occurrences but, setting 5/5 leaves segment 2-0-3 with 2900 occurrences and segment 3-0-2 with 2850 occurrences, choose the 5/5 setting.
[/quote]



Interesting strategy, I assume this is per column?, not total ALL 11 columns.

Da80th

[PadawanLotto]

[quote=Da80th]
[quote=PadawanLotto]


Check both settings and choose the one where the two segments have the closest occurrences in the past drawings. Say 4/4 setting leaves segment 2-0-3 with 3000 occurrences and segment 3-0-2 with 2800 occurrences but, setting 5/5 leaves segment 2-0-3 with 2900 occurrences and segment 3-0-2 with 2850 occurrences, choose the 5/5 setting.
[/quote]



Interesting strategy, I assume this is per column?, not total ALL 11 columns.

Da80th
[/quote]Correct, you have to filter each column seperately and skip the columns that have zero occurrences. All though I do not suggest using segment default settings like sysp34 uses.

Right now I am working with segment default settings that put the mid-point segment at the top of the occurrences for a pick 5 the mid-point segment is 1-4-0 and for the Oh 5/39 the Segment default is 2/15.

I'm also experimenting with using 1-3-1 as the top segment in which the segment default setting is 2/13. What does this do? For a pick 5 it narrows down 21 possible segments to 11 segments as the most common segments drawn. There is still a chance that other segments will be drawn but, as you already know you can't win them all.

[Da80th]

Thanks,

let me play around and see if I can combine your strategy with other ideas I have in mind.


Da80th

[PadawanLotto]

Ok, I did some more research and found that anybody interested in trying out this strategy you need to set the segment default settings so that the segments that contain no zeros are at the top of the past drawing occurrence list. The segment default settings for the Ohio 5/39 is 3/8, this puts segments 2-1-2, 2-2-1, 1-2-2, 3-1-1, 1-1-3, and 1-3-1 at the top of the past drawings occurrence list and in order highest to lowest occurrence.

Results will vary based on columns that draw a segment combination that contains a zero but try it out. In a pick 5 there are 6 segment combinations that contain no zeros.

[Jerzy]

I am working with a pick 6 game. There are 28 possible segment patterns to work with.

It seems to me that assigning the same segment setting (eg: 7/7 or 1/17 for all columns is a kind of big compromise. The best results can be achieved if we apply the right settings to each column individually.

To achieve the highest number concentration in the 2nd segment, I leave in the 1st segment only the 1st row in the column, and in the 3rd segment only the rows which contain the last 3 - 6 numbers in the columns. So the setting could be 1/17 or 1/20 or similar but each column can have a different setting depending on what the WNH Difference tab shows. This will group the largest 2nd segments at the top of the segment statistics table to leave them during the filtering. Filtering this way can be very effective.

It is also possible to remove the 3 segment numbers entirely, if the end of the 2nd segment = end of the column.

If you you identify the longest column, the last row in it can be accepted as the end of the 2nd segment in all columns. The 3rd segment will be excluded, the filtering will be less effective but safer than in the case where there are several numbers in the 3rd segment.

The division of columns into segments can be adjusted to improve the effectiveness of many segment filters. Each of them works best with certain segment settings. The default setting of 6/12 is not the best for all of them.

Certain setings can, for example, limit the count of unique segments that occur. In my 6/45 game, as backtesting demonstrates, with 13/13 segments setting 98.75% of past draws had 2-5 unique segments, and 91.26% of past draws had only 3-4 unique segments.

[sysp34]

[quote=CARBOB:1217014471]
[quote=PadawanLotto]
Hi sysp34, I see that you set your segment defaults so that the second segment is 0. I have a suggestion, set the segment default setting so that segments 2-0-3 and 3-0-2 are the highest occurring segments in the past drawing history. This should give you a better balance and when working the strategy these two segments should produce your better results.
[/quote]

Ragwi, for Fla, that setting will be 5/5, for 3-0-2/2-0-3. For 2-0-3/3-0-2, like Padawan recommends, the setting will be 4/4.
[/quote]

Bob using 5/5 with 302 or 203 would be a good idea to create full wheels and 7/7 or 6/12 segment preference just an example.

the point of this methods is to find key numbers one or two numbers because it can be seen



about the pictures there must be new mechanical drawing machine installed in Florida Fantasy 5 in early 2008 or 4th quarter 2007 because the occurrence of 7/7 decreased while in past it shown average 35x jackpot chance

Thanks to ImageShack for Free Image Hosting

and it would be good idea if we documented jackpot record using xyz methods for example like the attachment (jackpot occurrence in 2002 using segment preference 7/7) also use 7zip software to extract the files, the idea is to find when we use most hit, average and cold

good luck

[sysp34]

part 2