niceguy wrote:... I then Transfer these draw numbers to a custom analyser for futher processing, then I filter them using a match number filter.
In EL there is a way to directly analyze and filter ticket results. Here are the steps below;
1. Open a Complex Filter.
2. In the Design window click on 'Add Filter' and select the 'Match Numbers' filter. Then setup the filter as follows;
-
Matching Tickets: Accept
- Match Count: 1 (check mark 1 only)
- Numbers: 10 (select ticket number 10 only) 3. Now in the Design window, right-click on the Match Numbers filter and select 'Back-test' from the drop down menu.
4. When the back-test is complete, all of the accepted tickets will contain the number 10. To analyze
only these accepted tickets,...at the bottom of the back-test window click on the '
Show accepted draws only' button. Then to the right of that button click on '
Analyze'.
What this does, is bring up an available statistics list that will apply
only to the accepted back-test tickets. So if you wanted to know what Pairs, Triplets and Quads(etc.) are most common in tickets that contain the number 10, then you would choose 'Number Combinations' from this list. From here you can then select/highlight the table rows of the statistics you need and copy/paste them to a custom analyzer, complex filter or select the filter icon at the top of the table's window to directly filter the selected rows from a package. If you need more info let me know.