Printing playslips

[niceguy]

Hi There I'm in the process of setting up a new lottery game on E/L & am setting up the printer to print out the playslips.I have it all working well, but I can't remember how you adjust the "mark" that prints onto the boxes in the playslip. I want to be able to adjust the height & width of the mark. I couldn't see any adjustments under the "edit play slip printing" settings. Many thanks. :wand:

[Falcon]

Hi niceguy,

You cannot directly edit or alter the size of the mark - there is no facility to perform this. You can however alter mark size by adjusting the size of the box the mark appears in, thus if you have a 3mm sq box size adjust this down to say 2.5mm or 2mm sq and the mark consequently reduces in size to fit the box size.

You can adjust whether the mark is a cross or an oval as per these code lines which are in yourlottery.properties

# Print ellipse check marks
playslip.checkmark.ellipse=true

# Print cross check marks
playslip.checkmark.cross=false

regards

falcon

[niceguy]

Hi Falcon Many thanks for that.