Match Number Movements With Latest Result

Postby Joe » Thu Nov 20, 2008 9:28 am

yeah, i will see this, Mean time enjoy my new filter "Match Number Sum Roots", thanks
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Jerzy » Sun Nov 23, 2008 6:13 am

Joe,

I tested the Match Number Movement with Latest Result filter.

I entered the latest number movements and backtested. With the count settings: (6-6), (5-6) and (4-6) the filter identified just the last jackpots, which is probably correct. More jackpots were identified with the counts: (1-6), (2-6) and (3-6).

However, the Preview for the counts (6-6), (5-6) and (4-6) shows that no tickets would be removed or failed from the full package even though the latest jackpot ticket is present. It seems incorrect. Removing/Leaving tickets is possible only if the lower count is used.

I did not tested the Match Number Distance with the Latest filter, because no information how to use it is available.

How "number distance with the latest result" is different from "number movement with latest result" and how is it calculated for this filter?
Jerzy
 
Posts: 811
Joined: Mon Sep 18, 2006 5:26 am

Postby Joe » Sun Nov 23, 2008 6:17 am

[quote=Jerzy]the Preview for the counts (6-6), (5-6) and (4-6) shows that no tickets would be removed or failed from the full package even though the latest jackpot ticket is present. It seems incorrect. Removing/Leaving tickets is possible only if the lower count is used.[/quote]may be your selected movements satisfied all the combination in package, anyway I check the coding, thanks,
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Joe » Sun Nov 23, 2008 6:21 am

[quote=Jerzy]How "number distance with the latest result" is different from "number movement with latest result" and how is it calculated for this filter?[/quote]Its similar to Movements but take the positive value, ie the distance,
for ex: 5 and 8 has movement -3 (5 - 8) , but distance is 3 it wont bother whether the difference is positive or negative,
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Jerzy » Sun Nov 23, 2008 8:24 am

Joe,

Match Number Distance with Latest Result suffers from the same problem.

On back-testing for the position 1, with the count setting (6-6), it identifies the last jackpot ticket quite correctly, but on filtering with the same setting and Leave, it removes all tickets from the full package.
Jerzy
 
Posts: 811
Joined: Mon Sep 18, 2006 5:26 am

Postby Joe » Mon Nov 24, 2008 5:49 am

[quote=Jerzy]Match Number Distance with Latest Result suffers from the same problem.

On back-testing for the position 1, with the count setting (6-6), it identifies the last jackpot ticket quite correctly, but on filtering with the same setting and Leave, it removes all tickets from the full package.[/quote]
ok jerzy, I will fix it, thanks, and I got problem in my laptop, its not working, I fix it once i clear it, thanks
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Joe » Tue Nov 25, 2008 4:25 pm

Hi koo,

I already explained about the filter "Match Number Movements With Latest Result" here http://www.expertlotto.com/en/forum/for ... 1113#11427,

And "Match Number Distance With Latest" filter is similar to "Match Number Movements With Latest" filter,

only difference is, in "Match Number Distance With Latest" filter, we are taking only the positive values, even if difference value is negative,

see the same example,

01/2007, 03,05,06,35,38,48
53/2006, 14,16,22,24,39,45

The 1st position 3 have 6 distances with its previous result, ie) 11, 13, 19, 21, 36, 42, (jus subtract and take the positive value from each numbers in its previous results),

likewise 2nd position number 5 has 6 Distances with its previous result ie, 9, 11, 17, 19, 34, 40,

That's the difference between these two filters,

If I am not clear please let me know,

Thanks
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Joe » Wed Nov 26, 2008 5:53 pm

[quote=Jerzy:1227421457]
Joe,

Match Number Distance with Latest Result suffers from the same problem.

On back-testing for the position 1, with the count setting (6-6), it identifies the last jackpot ticket quite correctly, but on filtering with the same setting and Leave, it removes all tickets from the full package.
[/quote]

New Versions of "Match Number Distance with latest" has been added.
Bugs fixed.
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Joe » Wed Nov 26, 2008 6:01 pm

New Version(1.0.2) of "Match Number Movements with latest" has been added.
Bugs fixed.
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Jerzy » Fri Nov 28, 2008 5:33 am

Joe,

Unfortunately, it is still impossible to use your Match Number Movement with Latest Result filter.

I tested this filter after calculating number movements according to your instruction. I did not skip any draw in the winning numbers data.

Which ticket should be shown in the panel on backtesting? The last draw ticket or the previous one? It seem to me that the previous draw ticket at least. The latest draw ticket is only a referrence point.

Backtesting with the movement counts higher than 2 - 6 doesn't show any tickets. And the filter doesn't work with movement counts higher than that.
Jerzy
 
Posts: 811
Joined: Mon Sep 18, 2006 5:26 am

Postby Jerzy » Fri Nov 28, 2008 5:47 am

Joe,

The Match Number Distance with the Latest Result filter suffers from the same problem.

And I notice that the word "Distance" has a meaning which is different from the meaning of the same word used in the names of other filters.

In other filters "distance" means a difference between numbers within the same combinations. There are 5 such distances between neighboring numbers. In this filter we compare two combinations and count the differences between the numbers in two combinations. And there are 6 such differences for each position. It is confusing when someone tries to understand how the filter works.
Jerzy
 
Posts: 811
Joined: Mon Sep 18, 2006 5:26 am

Postby teoman » Fri Nov 28, 2008 12:12 pm

[quote=Jerzy]
Joe,

The Match Number Distance with the Latest Result filter suffers from the same problem.

And I notice that the word "Distance" has a meaning which is different from the meaning of the same word used in the names of other filters.

In other filters "distance" means a difference between numbers within the same combinations. There are 5 such distances between neighboring numbers. In this filter we compare two combinations and count the differences between the numbers in two combinations. And there are 6 such differences for each position. It is confusing when someone tries to understand how the filter works.[/quote]
Hi Jerzy,

The Match Number Distance with the Latest Result filter is the same as "Match Number Movement with Latest Result" only as negative differences are considered as positive

Thanks!
teoman
 
Posts: 191
Joined: Sun Apr 27, 2008 11:27 pm

Postby Joe » Fri Nov 28, 2008 12:57 pm

Jerzy, a little change in my example,

01/2007, 03,05,06,35,38,48
53/2006, 14,16,22,24,39,45

here 01/2007 is checked with its previous result 53/2006,

so if you select the position as 1, then it will take the first position in 53/2006 instead of 1st position in 01/2007, i made this mistake in previous post, thats the confusion i think,

so now, see

so the winning combination 01/2007 has 6 distances with its previous result's 1st position Number 14 as 11, 09, 08, 21, 24, 34, calculated as (3- 14), (5 - 14), (6 - 14), (35 - 14), (38 - 14), (48 - 14),

now please check you results and let me know

thanks
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Joe » Fri Nov 28, 2008 12:59 pm

As teoman said, the same calculation for Distance, which consider the negative value as positive, thats the only difference, thanks
Joe
 
Posts: 1227
Joined: Mon Sep 18, 2006 6:51 pm
Location: Petaling Jaya, Malaysia

Postby Jerzy » Fri Nov 28, 2008 1:53 pm

Teoman,

I know that the Match Number Distance with the Latest Result is a different version of Match Number Movement with the Latest Result. I am just saying that calling it a distance filter is inappropriate, because it is not a form of distance filter.
Jerzy
 
Posts: 811
Joined: Mon Sep 18, 2006 5:26 am

PreviousNext

Return to Plugin Development

Who is online

Users browsing this forum: No registered users and 3 guests

cron